技術中心-技術文件
Nine9 99146/99151 Boring Bars 研磨刀片及切削資料 5-17
研磨刀片
刀片 | 敘 述 |
CCGT 030102 |
CCGT 040102 |
CCGW 040102 |
CCGH 0602U |
CCFT 060204 |
CCFW 060204 |
CCFT 060204HP |
CCMW 060204 | |||
---|---|---|---|---|---|---|---|---|---|---|---|---|
NC30 | K20F、TiAlN鍍層適用於鑄鐵、碳鋼、合金鋼、不 鏽鋼 |
● | ● | |||||||||
DM | PCD焊刃經拋光處理後,可用於精修表面加工且延 長刀具壽命 |
● | ● | |||||||||
NC2032 | K20F、AlTiN 鍍層、適用於高速加工鑄鐵 | ● | ||||||||||
NC2033 | K20F、TiN鍍層、適用於碳鋼、合金鋼、不鏽鋼 | ● | ||||||||||
NC9031 | K20F、TiN鍍層、適用於鋁合金、銅及非鐵金 | ● | ||||||||||
NC9036 | K20F、DLC鍍層、壽命長、適用於鋁合金、銅及非 鐵金屬 |
● | ● | ● | ||||||||
U-NC9036 | K20F、DLC鍍層、適用於鏡面加工 | ● | ||||||||||
尺寸 | Ic | 3.5 | 4.3 | 4.3 | 6.35 | 6.35 | 6.35 | 6.35 | 6.35 | |||
S | 1.4 | 1.8 | 1.8 | 2.38 | 2.38 | 2.38 | 2.38 | 2.38 | ||||
rε | 0.2 | 0.2 | 0.2 | - | 0.4 | 0.4 | 0.4 | 0.4 |
切削資料
工件材質 | Cutting conditions or surface finishes | Grade of insert | Cutting Speed Vc(m/min.) | feed rate f (mm/rev.) | Re0.2 | Re0.4 | ||
---|---|---|---|---|---|---|---|---|
Ae (mm) | ||||||||
碳鋼 | Regular cutting | NC2033 | 120-150-200 | 0.05-0.07-0.10 | 0.05 | 0.1 | ||
Interrupted cutting | NC30 | 100-120-140 | 0.04-0.05-0.08 | 0.05 | 0.1 | |||
合金鋼 | Regular cutting | NC2033 | 100-120-140 | 0.05-0.07-0.10 | 0.05 | 0.1 | ||
Interrupted cutting | NC30 | 80-100-120 | 0.04-0.05-0.08 | 0.05 | 0.1 | |||
不鏽鋼 | Regular cutting | NC2033 | 80-100-120 | 0.05-0.07-0.10 | 0.05 | 0.1 | ||
Interrupted cutting | NC30 | 70-80-100 | 0.05-0.07-0.10 | 0.05 | 0.1 | |||
鑄鐵 | Regular cutting | NC2032 | NC30 | 80-100-120 | 0.05-0.07-0.10 | 0.05 | 0.1 | |
Brass, Bronze and Al-alloy Si >6% |
Regular cutting | NC9036 | NC9031 | 150-200-300 | 0.05-0.07-0.10 | 0.05 | 0.1 | |
Super mirror finish | U-NC9036 | 150-200-300 | 0.15-0.2-0.25 | 0.05 | ||||
鋁,鋁合金 非鐵材質 |
Regular cutting | NC9036 | NC9031 | 150-200-300 | 0.05-0.07-0.10 | 0.05 | 0.1 | |
Super finished | DM | 500-1000-2000 | 0.05-0.07-0.10 | 0.05 | 0.1 | |||
Super mirror finish | U-NC9036 | 150-200-300 | 0.15-0.20-0.25 | 0.05 | ||||
熱處理鋼 |
Regular cutting | NC30 | 80-100-120 | 0.04-0.06-0.08 | 0.05 | 0.1 |